steel columns for public lighting

cilindrical-conical, seamless drawnWith our two advanced machineries, we are able to produce cilindrical-conical tapered lighting columns without the familiar visible welded seam running from top to bottom. These columns will be drawn from cylindrical tubes. For these columns, we can guarantee the exact diameter (?8 till ?73 mm), length (maximum 16 meter), wall thickness (3 till 6,3 mm) and conicity can be guaranteed. All conicities are possible. Under the chapter conical tubes and 'special tubes', you can find additional information about different shapes, such as parabola, cigar, ribbed or tubes with decorative elements.
While there are no visible welds, the columns will have a longer life time. The non-interupted structure and the rounding on the total length of the column will take care for a better stability of the column and luminiare.
cilindrical stepped (variable diameters)A classic column, which has been used for decades, is the cilindrical stepped column. This type of column can be delivered in different variants: post columns, columns with fixed or mountable brackets, foldable column, lighting columns with banners, etc. All types of columns can be supplied with wedges, ground plate or base plate.The cilindrical stepped columns can be produced out of one piece till a length of 22 meters. If you need lighting columns with a length of minimal 22 meter and it is necessery to hot dip galvanise the column, then we have to split up the column in two sections (due to the length of the zinc bath) We are happy to inform you about the correct solutions.

lighting columns

steel conical tapered columns, seamless drawn, supplied with a double bracket for public lighting. The bracket is produced from two conical tapered tubes, seamless drawn. Preserving: hot dip galvanised according to EN ISO 1461 and powder coated.

lighting column

steel cilindrical-conical tapered lighting column, seamless drawn, provided with two brackets for public lighting. The upper bracket is mountable. The requirement of the client for invisible bolds between the column and the bracket was ful filled. Preserving: hot dip galvanised + powder coating (RAL 9005)

conical tapered lighting columns (seamless drawn)A post column with a length above ground level of 4 meter. Preserving: hot dip galvanised according to EN ISO 1461 and powder coated in RAL 9005.